Bleeding the late model GM hydraulic system in it's stock form is a hassle. After you tear apart the car to gain access to the bleeder, you've got to have someone pump the pedal while you're under the car cracking the bleeder and hoping everybody's timing is right - not to mention keeping the reservoir full! It's easy to see how something so simple can quickly turn into a huge ordeal.
With our "One Man Job" Remote Clutch SPEEDbleeder Line, Tick Performance is taking great strides in making things much easier on you. At 4'+ in length, you're able to route the line to nearly anywhere on the car you want. Here in house, we usually zip tie it to a brake line coming out of the brake master cylinder so it's easy to reach with the hood popped. Another huge improvement is our SPEEDbleeder end - allowing you to simply crack it open one time and close it once the air is out of the system, instead of having to open and close the bleeder with every pump of the pedal.
Why wrestle with your hydraulic system every time you want to bleed it? Rely on Tick Performance to make the job much easier for you with our "One Man Job" Remote Clutch SPEEDbleeder Line. A must-install next time you've got the transmission out of your C6 Corvette & Z06.
Posted by Siracer71 on 22nd Feb 2018
This is a no brainer product to have when replacing your clutch. Makes bleeding your fluid very easy and fast!
Posted by Steve on 10th Dec 2015
Line works great, have used them in the past and always loved them. We install one with every clutch we do in Corvettes & Camaro's.
Posted by E Mems on 8th Oct 2015
I have bought your product and its the Greatest, I have some from other companies and I couldn't even use theirs because they never sent me the right fittings, but yours work great and the line was plenty long enough , so again thank so much for your product and I WILL be buying more merchandise from you , thanx again , Erick
Posted by Dave Mayer on 6th Mar 2015
Works perfectly. It took me ten minutes to bleed the clutch slave.
Posted by ACTZ13 on 10th May 2013
Excellent piece,big time-saver,does what it's supposed to do,not much more to be said.
Thanks for a great product.
Posted by Shaun on 27th Mar 2013
Comes right off the slave and ran the hose top side by the fluid reservoir and literally flush the whole hydraulic system with 5-6 pumps and takes 3 mins vs putting ur car in the air and spending hours reaching in the bell housing and getting fluid everywhere
Posted by Unknown on 11th Sep 2012
Fast shipping, high quality product.