The Tick Performance Intercooler Completion kit is designed to get you started with installing and properly operating your billet air-to-water intercooler. These kits are built to work with our 1,400hp Air-to-Water intercooler. This dual feed/dual exit kit maximizes the water flow through the intercooler by splitting it with a "Y" distribution block and circulating the water through both sides.
These kits include the necessary fittings for the size we recommend, as well as the appropriate Davies Craig water pump. These pumps are known throughout the industry as reliable and well-performing components that won't let you down on the track or on the street.
Included:
-
Intercooler Pumps - 40gpm Davies Craig Electric Water Pumps DC-8165 Part # TPDC-8165 (x1)
-
TP495109 Adapter, -12 ORB Male to -12 AN Male Black (x4)
-
TP495119 Adapter -16 ORB Male to -16 AN Male Black (x2)
-
TP900617 Y- Block -16AN to 2x -12AN Male Black (x2)
This kit does not include:
-
Lines, Hose Ends, and Tank
Options
The included fittings are straight, however, to help route your lines on the intercooler is a more eye pleasing direction, you can upgrade to two or four 90-degree swivel fittings. This can direct the lines in and out of the intercooler at 90-degrees, so you can plumb them parallel to the intercooler.
Lines
The length and style of line greatly depends on your vehicle. We recommend any lines within stand a minimum of 350-degrees Fahrenheit.
Tank
Tick Performance recommends the 1,400hp intercooler be used with a 3-5 gallon ice tank, and any larger intercooler use a 4-7 gallon ice tank. The system can be operated with only an ice tank that runs ice and water/coolant through the system. However, for street driving, you may add a heat exchanger to the system to help maintain more constant temperatures for longer use.
