Have a late-model GM truck or SUV that requires more fuel? We offer this simple plug-and-play Hot-Wire Fuel Pump harness which uses the stock fuse box for an easy and factory-appearing installation. This pre-made harness can withstand high-heat and abrasion in an anti-snag loom.
This Hot-Wire Fuel Pump Kit is designed to make the installation of an aftermarket fuel pump easy and reliable. The kit provides ample current to run most aftermarket in-tank pumps. The kit can also be used with a stock-fuel pump you’d like to run at maximum efficiency. The harness is weather proof and designed to be installed in factory locations.
The harness simply plugs into the stock fuel pump harness plug, and the relay mounts onto a factory frame bracket (see instructions). The power lead wire simply routes to the under-hood fuse box, and plugs in with the ring terminal supplied in the kit. Install the terminal end into the fuse box, plug in the supplied fuse and you’re done! This provides a simple, easy, clean, and factory-style installation. No specialty tools required.
Pre-made high-temp and abrasion resistant harness
Relay and 50amp fuse included
Water/Weather proof components
Provides needed current for aftermarket fuel pumps
Can increase the life of your stock fuel pump
Easy installation, and clean wiring harness
Reliable and easy to maintain
1x Relay and Harness
1x 50amp Fuse
1x 10awg Ring Terminal and Shrink Wrap
1x J-Case Fuse
1x Nut and Bolt
'04-'11 GM Full Size Truck/SUV
'04-'07 May not fit L59 Flex-Fuel equipped vehicles
'07-'11 Will not fit vehicles with FPCM (PWM Driven Fuel pump and computer)