LME 427" LSX 1500HP Short Block

Late Model Engines (LME)
$10,713.00
Current Stock:
SKU:
LME-427-LSX1500SB
Availability:
Drop-Ships Directly from Manufacturer (4-6 Week Lead Time)

This LME 427" LSX 1500 short block is the heart of the absolute proven combination that gives you 1500+ horsepower at your disposal. The solid foundation starts with your choice of blocks; the rigid piece from Dart or direct from GM, with the mighty LSX. Both feature remarkable improvements to the oiling system and cast with exceptional materials. Handling the top end are provisions for 6-bolt head configuration with option to upgrade to 1/2" studs, this recourse makes cylinder head gasket and head lift issues a thing of the past. LMEs custom forged 4.125" piston from Wiseco is designed to handle the astounding heat and cylinder pressures today's boosted street machines produce. Callies Dragonslayer crank with a 4.000" stroke, 6.125" Ultra rods, and .200" wall heavy duty pins conclude the proven rotating construction making this the ultimate base for street car dominance.(Shipping covers delivery to most areas but is subject to change

Displacement: 427" Bore: 4.125"
Proven Power Rating: 1500+ RWHP Stroke: 4.000"
Compression Ratio: 9.5 - 10 :1  Rod Length 6.125"
Cylinder Head Compatibility: Any LS Configuration Oil System Type: Dry or Wet Sump

Block: GM LSX Bow Tie
Crankshaft: Callies DragonSlayer w/ LME Blueprinting Process
Connecting Rods: Callies Ultra Billet H-Beam w/ ARP Ultra 7/16" Bolts
Pistons: Wiseco Custom Forged FI  w/ Lateral Gas Ports (.300" material above top ring land)
Wrist Pins: Tool Steel Heavy Wall .200"
Ring Pack: NPR Stainless Top (for high heat applications) Napier Second, 3mm Oil
Bearings: Clevite H-Series Rods and Mains w/ Grooved Thrust, Dura-Bond One Piece Cam Bearings
Main Studs: ARP 


LME Standard Shortblock Blueprinting Process:

  • Block is fully deburred & inspected for flaws

  • Cylinders diamond honed with torque plates for optimal clearance per application

  • Crankshaft journals indexed & trued to exact tolerance

  • Optimal cylinder geometry achieved with diamond hone and surface finish verified with profilometer

  • Chamfered oil holes for improved oiling to bearings

  • Cylinders machined for rod clearance per application

  • Crankshaft journals polished to 2 Ra or better surface finish

  • Block and components meticulously deburred & cleaned after machining process

  • Crankshaft balanced within ¼ oz-in tolerance

  • All five main bearings & all eight rod bearing clearances measured and adjusted for application

  • Connecting rod housing bores checked & adjusted for optimal roundness & size

  • Ring are precision file fit per application

  • Piston pin bores measured & adjusted for application

  • Cam bearings installed and test cam fitted to ensure smooth rotation

  • Block aline honed and set to low of spec for maximun bearing crush

  • All oil galley plugs and dowel pins installed

  • Deck surfaces machined perpendicular to mains & deck height set for optimal quench

  • Meticulous final assembly of shortblock

  • Cylinders bored (when applicable) on 4 axis CNC perpendicular to mains giving you a true 90o  V8

  • All tolerances, clearances, machining specs, and part numbers are recorded and documented in build sheet