**REVISED NOVEMBER 2018 FOR EASIER INSTALL - see updated pictures!
Is your clutch pedal sticking to the floor when you drive your car aggressively? Are you having trouble shifting your car quickly in the upper RPMs? Are 1st Gear and Reverse hard to engage while the car is sitting still? You’re not alone!
Tens of Thousands of LS1 F-Body owners have cured issues like these (or avoided them altogether) with our Tick Performance Adjustable Clutch Master Cylinder Kits!
GM did not want to replace transmission and driveline parts under warranty, so they designed a very weak, anemic clutch master cylinder barely capable of moving enough fluid to fully disengage the stock clutch in perfect working order. With years of wear (and/or an aftermarket clutch that requires more fluid to disengage), the inadequacy of the GM Master Cylinder becomes even more apparent.
Our Tick Performance Adjustable Clutch Master Cylinder Kits are built here in the USA around Tilton 7/8” Bore Cylinders (the same used in NASCAR every Sunday) and are made adjustable so that you can tailor the amount of fluid that your system needs in order to fully disengage ANY clutch, from stock to hardcore race-only clutches. With our kit installed, you’ll notice:
A slightly stiffer (we normally see ~15%), shorter pedal (in most cases) due to the increased cylinder bore
A clutch pedal that is easier to modulate with a predictable, constant engagement point
Effortless shifts at any RPM (especially high RPM), even when driving extremely aggressively
Longer clutch & transmission life as a result of a properly-disengaging clutch
Multiple other issues and annoyances fixed, including the infamous “crashed pedal”
Every Tick Performance Adjustable Clutch Master Cylinder Kit ships complete with everything needed to install, including our Unrestricted and Heat-Wrapped Stainless Braided Clutch Hydraulic Line (eliminating the need for the "drill mod"), all necessary hardware, and easy to understand instructions. Installation generally takes 60-90 minutes and adjustments can be made at any time without any tools.
This Tick Performance Adjustable Clutch Master Cylinder Kit is capable of more fluid flow than any competitor’s offering, and we stand behind it with a LIFETIME Warranty against leakage. Rest assured that with our kit installed, you'll have the quickest shifting, most reliable kit available under your left foot!
Option Guide: Do I need a GM Quick Disconnect Tool? A special tool is NOT necessary in order to remove & reinstall the GM Quick Disconnect Fitting that mates your hydraulic clutch line to your slave cylinder, but it does make the task a bit easier (and reduces the risk of damage) versus using a screwdriver or universal tool. The GM Quick Disconnect Tool that we offer is specifically designed for use with the GM Quick Disconnect Fitting.
This Tick Performance Adjustable Clutch Master Cylinder Kit is warrantied against leakage for the entire time you own yours! If you develop a leak, simply send the kit back with a copy of your invoice and the cylinder will be replaced or repaired and shipped back to you via Ground free of charge. Our warranty is void when used in non-original ("swap") applications.