This complete price includes Parts (Listed Below), Labor AND Free Shipping on your T56 (both ways!)
Our Level One Standard Rebuild includes the following:
- Complete tear-down, degrease & thorough inspection of entire transmission
- Bronze 1-4 Fork Pads
- Bronze 5-6 & Reverse Fork Pads
- Billet 3-4 Synchronizer Keys (with upgraded springs)
- New OEM 1-2, 5-6 & Reverse Keys & Springs
- Carbon Fiber Synchronizer (blocker) Rings
- New Front Seal
- New Inner & Outer Rear Seals
- New Rail Seal
- New Wiper Seal
- End-play set to our custom specifications
- Professional Reassembly done 100% by hand
- 90-Day Warranty
- 5 Qts of Fluid
Option Guide: Do I need New Bearings?
Although they’re not included with our rebuild packages, we consider bearings a smart thing to do for everyone and a must do for those of you with more than 120,000 miles on the clock. If you’ve had any strange noises coming from your transmission, bearings are a wise investment. We use Timken and Koyo Bearings. This option adds no extra turnaround time.
Option Guide: Do I need the Steel 3-4 Shift Fork?
The Steel 3-4 Shift Fork is STRONGLY suggested for all pre-2000 model six speed transmissions equipped with the Aluminum fork, which is the a very weak link inside your T56! Starting in 2000, all T56 Transmissions came equipped with the Steel 3-4 Shift Fork, which is much stronger than the bend-and-break prone Aluminum fork. This option adds no extra turnaround time.
Option Guide: Should I get Micro Polish?
Tick Performance Micropolishing consists of rotating a part at relatively slow speeds. As the part rotates through the machine, non-abrasive media makes contact on all surfaces of the part. At Tick Performance, our Micropolishing has two processes. The first process introduces a cutting solution into the media. The cutting solution very slowly smooths the surface of the part from the gentle wiping of our non-abrasive media. The second process is the polishing itself that utilizes a different type of solution. This solution acts as a varnish that makes the metal part look like it has a chrome finish. The Tick Performance Micropolishing adds horsepower gains, achieving higher RPMs while simultaneously lowering operating temperatures and adding longer service life.
Option Guide: Should I have the Bungs & Sprayers Installed?
It is seen time and time again in big horsepower cars that do standing mile or high speed pulls often, and road race or autocross applications; the input shaft bearing can become starved for fluid and fail, causing a chain reaction of damage inside the transmission. With this option, we install and weld bungs and spray tubes inside your transmission that will direct transmission fluid onto your input shaft and third gear teeth that are prone to failure. This kit now includes our Hi-Flow Transmission Fluid Pump Kit. This kit will require some plumbing and electrical wiring. This option adds no extra turnaround time.
Option Guide: Should I opt for an Aftermarket Gear Set?
CALL FOR AVAILABILITY & ESTIMATED LEAD TIME
With the ability to make over 1000hp on the street today, transmissions are pushed harder and harder and G-Force understands. With that in mind G-force manufactures a 6-Speed upgrade kit available for any T-56 variation. Whether you have a power adder or just big cubic inches, we know this is what you have been waiting for. We have TRUE bolt-in kits to fit Viper, Corvette, Camaro, and Cobra applications along with custom installation kits that allow for an even wider range of installations. With the optional G-Force mainshafts, these kits have the ability to handle approximately 1200* horsepower and 1000 ft-lb. of torque depending on the application. Our kit combines the strength of a full-out race transmission with the factory look, drivability, and fit of an OEM installation. The G-Force Street 6-Speed conversion requires no external case, tailhousing, or shifter modifications to your existing T-56. This means that your stock mounting hardware and dimensions will be utilized. This is not a one-size-fits-all kit. We have kits specifically designed for each application including special inputs for each vehicle.
In order to achieve the exceptional horsepower and torque handling abilities this kit has to offer, G-Force has again gone back to its racing heritage. While totally reengineering the gear design and tooth profile, we also added gear width wherever possible and have gone with our vast experience in terms of material selection. We use a proven 9310 alloy material for the gears, and this means exceptional gear strength. These kits can utilize the factory overdrive gears or they can be upgraded with G-Force Overdrives as well.
These G-Force Street 6-Speed kits feature helical gearing to maintain a comfortable noise level while still maintaining exceptional strength.
While slightly noisier than a stock T-56, the increased gear noise in not excessive and nothing like a straightcut, race-only transmission. We have tested slightly differing designs to come up with the best strength/quietness levels possible when dealing with the excessive power that these kits are made to cope with.
To further enhance the performance of your T-56, G-Force has come up with some additional performance options. Quicker, smoother shifting is always a plus when driving any manual transmission, and this is why G-Force has manufactured a double/triple cone conversion for your Viper, Camaro, or Cobra. While initially found only in C5 and C6 Corvette applications, this conversion allows for the installation of the superior shifting double/triple cone synchronizer setup to be installed into any T-56. If you own a Corvette, you already have this setup in your transmission. We do, however, have upgraded mainshafts made specifically for the C5-C6 transmissions. If you are looking for a transmission to be used in a project car or just want to trade in your worn-out T-56, G-Force can build you a complete unit with our gear kit already installed. We can use a new or remanufactured core depending on what you would like.
G-Force also has a dog ring (face tooth) version of this transmission available as well.
We also have our 2.71 gear kit available in a dog-ring version. The overdrives are kept synchronized to provide a smooth, stock-like driving experience in 5th and 6th gears. Like the synchronized versions of our gear kits, the dog-ring kit is rated at 1200hp, plus or minus depending on the specific application.
*Obviously, power and torque ratings vary more or less depending upon weight, clutch, tire, RPM, etc. Available ratios are listed below, please put in the order notes what ratio you would like.
|G-Force Gears 1st to 6th|
Option Guide: Should I have my transmission Painted or Powdercoated?
During any rebuild here at Tick Performance, all transmission cases are washed and degreased. Even after this treatment, many are stained, discolored and just don’t look as good as they did when new. Our media blast and paint service gives the transmission a much more professional, finished look. Available in Black Satin or Silver. This option adds no extra turnaround time. You can also opt for our powdercoating service, which is much more durable than paint. Also available in Black Satin or Silver. This option adds 10-15 days to your turnaround time.
1 Review Hide Reviews Show Reviews
My Corvette shifts so nice now, thank you so much for the great work guys. I can't wait to get it to the track.