Level 1 T56 Magnum, Magnum F, & Magnum XL Rebuild

TICKshift
$1,999.99
$1,999.99
$1,849.99
(You save $150.00)
Current Stock:
0
SKU:
TICKL1MAG
Availability:
Turnaround Time is 5-10 Business Days (plus shipping time)

This complete price includes Parts (Listed Below), Labor AND Free Shipping on your Transmission (both ways!)

Our Level One Standard Rebuild will fix all miscellaneous assembly issues with your transmission (including all 2nd gear problems) and includes the following:

  • Complete tear-down, degrease & thorough inspection of entire transmission
  • Bronze Fork Pad Upgrade on all gears
  • Carbon Blocker Ring Upgrade on 1-4 gears
  • OEM Blocker Ring Replacement on 5-6-R gears
  • Bronze Shifter Cup Bushing Upgrade (Where Applicable) 
  • New Front Seal
  • New Rear Seal
  • End-play set to our custom specifications
  • Professional Reassembly done 100% by hand

Option Guide: Should I get Micro Polish?
Tick Performance Micro polishing consists of rotating a part at relatively slow speeds. As the part rotates through the machine, non-abrasive media makes contact on all surfaces of the part. At Tick Performance, our Micro polishing has two processes. The first process introduces a cutting solution into the media. The cutting solution very slowly smooths the surface of the part from the gentle wiping of our non-abrasive media. The second process is the polishing itself that utilizes a different type of solution. This solution acts as a varnish that makes the metal part look like it has a chrome finish. The Tick Performance Micro polishing adds horsepower gains, achieving higher RPMs while simultaneously lowering operating temperatures and adding longer service life.

Option Guide: Should I have the Bungs & Sprayers Installed?
It is seen time and time again in big horsepower cars that do standing mile or high speed pulls often, and road race or autocross applications; the input shaft bearing can become starved for fluid and fail, causing a chain reaction of damage inside the transmission.  With this option, we install and weld bungs and spray tubes inside your transmission that will direct transmission fluid onto your input shaft and third gear teeth that are prone to failure. This kit now includes our Hi-Flow Transmission Fluid Pump Kit. This kit will require some plumbing and electrical wiring. This option adds no extra turnaround time.

Option Guide: Billet Front Plate

Include the Tick Performance Billet Front plate and save $200. The front plate is $50 when combined with a rebuild like this one, and includes a much-improved bung and sprayer design ($150 value). The sprayer consisted of a machined and welded bar that extrudes into the transmission, coating 2nd, 3rd, and 4th gears more evenly with oil. 

·       Improved Bungs and Sprayer system coats 2nd, 3rd and 4th gears in oil 

·       Improved rigidity, better gear mesh, and engagement 

·       O-ring sealing for a leak-proof design 

·       Can be used with either T56 or Magnums (includes necessary adapters) 

The Tick Performance Billet Front Plate for T56 and T56 Magnums is machined here in house in Mount Airy, North Carolina. The billet design vastly improves strength, which decreases gear deflection and enhances performance.

In our testing, we’ve found better gear engagement and improved gear wear patterns. It handles torque deflection better, too, improving the life of your transmission. See the dropdown menu to add it to your build. T56 transmissions require an additional bearing ($39.99). The billet plate pricing includes the Tick Performance Hi-Flow Trans Pump kit (with filter and fittings). 

Option Guide: Should I Upgrade to an Aftermarket Gear Set?
Tick Performance has partnered with PPG to offer the strongest gear sets on the market with our industry leading transmissions. You have the following options for gear sets:


Faceplated 1st-6th 
Faceplated 1st-4th (Allows you to retain or delete your 5th & 6th gear)
Synchronized 1st-6th
Synchronized 1st-4th (Allows you to retain your OEM 5th & 6th gear)

Faceplated gear sets are designed for race only applications and not recommended for street use. The faceplated gear sets include the gears, mainshaft, billet shift forks, slider assemblies, and billet interlock & bolts. The synchronized gear sets include only the gears themselves and will reuse the factory synchronizer assemblies, shift forks, mainshaft, and interlock.

The synchronized gear sets are available with the following ratio:
2.437 – 1.611 – 1.228 – 1.000 - .0891 - .080.


The faceplated gear sets are available in the following ratios:
2.148 - 1.561 - 1.228 - 1.000 - .875 - .770
2.437 - 1.611 - 1.228 - 1.000 - .875 - .770
2.589 - 1.841 - 1.352 - 1.000 - .797 - .630
2.946 - 2.071 - 1.438 - 1.000 - .797 - .630

If you are planning to retain your factory 5th & 6th gear the ratio will change as the PPG input ratio is different than OEM. To find your new ratio please use the following formula.

OEM Ratio / 1.161 = Y
Y x 1.381 = New Ratio

Option Guide: Should I have my transmission Painted or Powdercoated?
During any rebuild here at Tick Performance, all transmission cases are washed and degreased. Even after this treatment, many are stained, discolored and just don’t look as good as they did when new. Our media blast and paint service gives the transmission a much more professional, finished look. Available in Black Satin or Silver. This option adds no extra turnaround time.  You can also opt for our powdercoating service, which is much more durable than paint. Also available in Black Satin or Silver. This option adds 2-3 days to your turnaround time.


***UPDATED 08/09/2022*** Tick Performance warrants that each transmission sold by Tick Performance will be free from defects in material and workmanship under normal use for a period of 90 days after delivery of the transmission. Tick Performances sole obligation under this warranty shall be to repair or replace, at its option, the defective transmission at no charge to the customer. Under no circumstance will Tick Performance be liable for any oil, towing, labor, or rental vehicle charges. As a condition of this warranty the customer must return any allegedly defective product, freight prepaid to Tick Performance, accompanied by a packing slip indicating the shipper and a copy of the original invoice. This warranty does not apply to unsatisfactory product performance which is attributed in whole or in part, to any factor, condition, or circumstance other than defects in material or workmanship. Without limiting the foregoing, this warranty shall be null and void if repair or replacement is required because of improper installation, accident, physical or electrical stress, neglect, misuse, or any other cause other than the ordinary and intended use for which the product was designed, or if the product has been dismantled, altered, or repaired by the customer or by any third party. This warranty expressly does not cover loss or injury from the use of the product. By accepting and/or installing product, you are agreeing to the terms of the warranty. Parts damaged due to any reason other than defects in material or workmanship will be the sole responsibility of the customer. We are selling you an incomplete product. Life and performance of transmissions are dictated by quality of installation, associated components, and capability of the driver/operator. It is the potential installer and/or assembler’s responsibility to determine whether he or she has the necessary skills, knowledge, and tools to properly and safely install the Tick Performance built transmission described herein. Improper installation may cause the vehicle to function improperly or not to function. Improper assembly and/or installation may additionally cause a risk to personal safety or property. If the assembler and/or installer is confused or has questions or concerns about a particular assembly or installation, he or she should contact Tick Performance before proceeding further. The information contained in these instructions does not constitute a warranty or guarantee of any kind. An assembler’s and/or installer’s failure to correctly follow these guidelines constitutes a waiver of the assembler and/or installer’s rights against Tick Performance regarding any subsequent damages to property or personal injury caused by the assembler’s and/or installer’s improper assembly and/or installation. Tick Performance is not responsible for any vehicle damage resulting from improper installation or transmission failure. It is the customer and/or installers responsibility to install proper safety equipment into the vehicle upon installation of transmission or components. If you feel the need to act upon this warranty, you must contact Tick Performance at the first sign of an issue via phone and email. If contact is not made when the issue arises, and normal operation of the vehicle continues the warranty will be void.