Tick Performance proudly offers our Elite Series of Camshafts designed specifically for LS3 Engines! Using the latest and greatest technology available, we've put together a complete line of Camshafts that are designed to meet every goal, from mild to wild. Our Elite Series of Camshafts are all manufactured by Cam Motion and are updated with a new version every time an advancement in valvetrain technology becomes available, so they're ALWAYS cutting-edge! Although we suggest measuring for piston-to-valve clearance during ANY camshaft install, every Elite Series Camshaft is designed to fit in a stock engine & stock heads with adequate clearance unless otherwise noted. These cams are designed to maximize power, reliability and valvetrain longevity.
Tick Performance "SNS" TorqueMAX Stage 1 V2 Camshaft for LS3 & L99 Engines
219/230 | .607"/.573" | LSA111+4
Designed for: LS3, L92, LY6, L76 and L99 Engines with Square Port Heads (as they're equipped with stock)
Basic Operating RPM Range: 1500-6600
Expected Horsepower Gains: 45-50RWHP over the stock camshaft in a well-optimized setup
Expected Torque Gains: 20-35RWTQ over the stock camshaft in a well-optimized setup
Stall Converter Required: Yes, 3000+RPM
Rear Gear Upgrade Required: Suggested for maximum performance (3.08+ for manual transmissions and automatic)
Works Well with Nitrous: Yes (shot size less than 200)
Will Pass Most Smog Emissions: No
The Stage 1 camshaft was designed with 6.0L and 6.2L displacement engines with LS3 style cylinder heads. In a 6.0L or 6.2L displacement engine it is best utilized in daily driven vehicles that want maximum off idle torque production with stock driving manners. This camshaft is also a great selection for a mild street/strip vehicle that does not want to sacrifice performance for driving manners. This camshaft will offer large gains in torque and horsepower over the stock camshaft in any application that utilizes a 6.0L or 6.2L LS3 style cylinder head equipped engine.
Option Guide: Do I need the 3-Bolt Conversion Kit?
In 2007, GM began installing a camshaft in select LSx engines that used one large bolt to attach the timing chain gear. All Tick Performance Elite Series Camshafts use 3 bolts to attach the timing chain gear, as the earler LSx engines used. If your engine is a 2007 or newer (or if you're not sure which camshaft style you've got), we suggest adding the 3-Bolt Conversion Kit during checkout for an extra $24.99. This Conversion Kit includes everything that you'll need to convert your single-bolt setup over to the 3-Bolt setup (the proper timing chain gear and a set of 3 ARP camshaft bolts.) If you'd prefer to retain the single bolt style camshaft (not recommended), please place your order with us via phone.
