UMI 1993 - 2002 GM F-Body 3-Point Subframe Connectors- Bolt-In

Increase chassis stiffness, performance capabilities and overall drivability by adding UMI Performance's new 3-point style subframe connectors. This set up is designed to tie the front and rear subframes together while adding additional cross-bracing throughout the center of the vehicle protecting it to its fullest while keeping ground clearance issues to a minimum. This spider web affect greatly improves your car's handling ability while reducing t-top squeaks, dash rattles and quarter panel flexing, designed for auto-cross, road race as well as drag race set-ups. By connecting the front and rear subframes together this allows better weight transfer for improved traction and straighter launches. This subframe connector design is available in either a weld or bolt-in set-up please see below.
 
This set-up is a 100% bolt-in and requires no cutting, drilling or welding! No heat shield trimming or fuel line relocating is necessary with this set-up. All installation hardware is Grade 8 hardware and is supplied with each kit as well as detailed installation instructions. Although this set-up is a Bolt-In kit it can be welded at any time.

Chrome Moly- Chrome Moly version uses 1.750" x 0.083" 4130 Chrome Moly steel and is TIG welded. The Chrome Moly construction adds increased strength while reducing product weight making this item 5 lbs lighter than using mild steel. The mounting plates are machined from mild steel to allow this item to be MIG welded to the vehicle. Make your selection below.


Features:

•     Tightest fitting 3-point design on the market. This design keeps ground clearance issues at a minimum.
•     Uses rear control arm mount for increased strength and insures proper installation.
•     3-Point Spider Web design attaches to six major points through out the body for extreme chassis stiffness and handling benefits.
•     Tubular design allows for a tighter fit against the vehicles under carriage.
•     Bolt-In design requires no cutting, drilling or welding.

Build Specifications:

•     Constructed of 1.750” x 0.120” DOM Mild Steel Tubing
•     3-Point Brace uses 1.250” x 0.095” DOM Mild Steel Tubing
•     Front mounting points feature 0.250” Thick Mild Steel Mounting Plates
•     Mounting Plates Feature Precision CNC Machining to insure tolerances
•     MIG Welded Construction
•     Supplied with Brilliant Durable Powder Coat Finish