With our Air-to-Water Intercooler being a top seller it only made sense to offer it as a discounted combo package. This makes it easier for you to select which Holley Hi Ram, Mid Rise, or Lo Ram Manifold you want to run on your setup.
Specs
-
Supports up to 1,400hp
-
USA made core
-
4 Female -12 AN O-ring female inlet/outlets
-
Billet 6061-T6 aluminum construction
-
Includes top quality mounting hardware and O-ring sealing
Overall Heights
-
Overall Thickness 2.75"
-
Holley LS Hi-Ram Total Without Intercooler 12.32"
Combo Heights*
-
Holley LS Lo-Ram With Intercooler 11.82"
-
Holley LS Hi-Ram Total With Intercooler 15.07"
*Note: The total heights reference the front, top of the front-feed ram intakes. These are the peak heights, and the rear of the intakes slop down to be slightly shorter at the rear.
Option Guide: Which Holley manifold do I need?
The Holley Hi Ram, Mid Rise, & Low Ram is offered for various combinations. We have listed every manifold offered so you will need to select the manifold that is appropriate for your engine and cylinder head combo. If you need help choosing which manifold is best please don't hesitate to contact our friendly sales staff for assistance. The Gen V LT Low Ram does require the lower portion to be machined to clear our intercooler. Please see picture below.
***Please note that we do not recommend coating our intercooler with any form of coating that requires high temperature curing.***
***Will NOT Fit Holley Mid Ram Manifolds***
*NOTE* If you are planning to use the side feed lid we do not currently offer hardware for this particular manifold combo.
