EWP®115 Nylon/Digital Controller Combo
115 Litres per minute
12 & 24 Volt
Take total control of your engine cooling with the Davies Craig EWP®115 Nylon Electric Water Pump and LCD EWP®/Fan Digital Controller. The Controller will also manage the operation of your Thermatic® Fan.
The EWP®115 (115 litres per minute) pump is suitable for small, medium, large, high-performance, and 4WD vehicles. Its a performance accessory that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.
Mechanical belt-driven water pumps run directly off the motor and sap engine power the EWP®115 is hardwired into your electrical system, bypassing the engine and releasing up to an additional 10kw (13hp).
Combined with the LCD EWP®/Fan Digital Controller, the pump continues to run after youve switched off, eliminating heat soak and extending engine life.
Davies, Craigs revolutionary, Australian-designed EWP® pumps are made from anti-corrosive, lightweight nylon reinforced with fiberglass. Universal fit allows for easy mounting into the bottom radiator hose.
Our kits come with easy-to-understand DIY instructions and everything you need for easy installation, including different adaptors to fit various hose sizes and all necessary electrical wiring.
The EWP®115 and LCD EWP®/Fan Digital Controller Combo Pack is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.
The Davies, Craig EWP® header adaptor kit can replace the mechanical water pump completely. See page 24.
The worlds most advanced total engine cooling management includes:
- Universal fit
- More power
- More cooling
- Increase fuel efficiency
- Extend engine life
- World-leading technology
- Lightweight Nylon
Please refer opposite for EWP® specifications and page 7 for LCD EWP®/Fan Digital Controller specifications.
| 12Volt | 24Volt |
|---|---|
| Operating voltage: 3V DC to 15V DC | Operating voltage: 20V DC to 27V DC |
| Maximum current: 10A @ 13V | Maximum current: 5.5A @ 24V |
| Flow rate (max): 115 L/min (30.38 US gal/min) @ 13V DC | Flow rate (max): 115 L/min (30.38 US gal/min) @ 24V DC |
| Operating temp.: -40° to 130°C (-40° to 266°F) | Operating temp.: -40° to 130°C (-40° to 266°F) |
| Pump design: Clockwise centrifugal with volute chamber | Pump design: Clockwise centrifugal with volute chamber |
| Pump weight: 920 grams (2.03 lb) | Pump weight: 920 grams (2.03 lb) |
| Pump material: Nylon 66 - 30% glass filled | Pump material: Nylon 66 - 30% glass filled |
| Burst pressure: 500 kPa (72.5 psi) | Burst pressure: 500 kPa (72.5 psi) |
| Seal: Ceramic face seal | Seal: Ceramic face seal |
| Fits hose sizes: 35mm to 51mm (1? to 2) | Fits hose sizes: 35mm to 51mm (1? to 2) |
