The Holley EFI Digital Dash is completely customizable with a variety of gauge and indicator screens that can be programmed to display any parameter you need. The dash also offers a virtual switch panel, user defined alarms, configurable shift lights and can control on screen playback of your EFI data logs.
This Holley EFI Digital Dash measures 7.5" wide, 4.625" tall and 1" deep which makes it a compact, customizable dash for use in a variety of motorsports applications. The Dash features a 7" low glare, high brightness, high contrast, full color touch screen for easy viewing even in full sun, plug and play connection to all Holley EFI systems as well as a weather proof aluminum housing featuring flexible mounting options. Monitor the power of your Holley EFI system at a glance!
Plug and play connection to all Holley EFI systems via CAN bus
Compact, customizable dash for use in a variety of motorsports applications
7" low glare, high brightness, high contrast, full color touch screen for easy viewing even in full sun
Completely customizable display of all EFI parameters including every user configurable input and output available
Multiple gauge and indicator types with limitless customization options
Quickly toggle between multiple active screens (tune, warm-up, race, drive, etc.)
Virtual Switch Panel (replaces the need for physical switches)
User defined alarms for any input
Configurable progressive shift lights and light bar
Control and on screen playback of EFI data logs
Download and save Holley EFI data logs to external USB memory stick
Expandable internal storage on micro SD card
Support for future USB devices
Upgradable with future software enhancements
Optional harness available to add physical inputs and outputs to the dash that can be used to perform multiple operations
OPTION GUIDE: Should I include the Digital Dash Module?
The Digital Dash Power Module is a complete plug and play module, to compliment your Holley EFI system. This module keeps your Holley Digital Dash or other Holley displays powered during engine cranking, and quick key off/on cycles, preventing the timely rebooting delay of the display. Designed and built in house. Installation takes only a few seconds, as there is no wiring or splicing required at all. Offered for 12 volt and 16 volt systems.
OPTION GUIDE: Should I include the Fuel Level Harness?
The TP7DF is a harness built specifically for adding a Fuel Level Gauge to the 7" Holley Digital Dash. No special tools needed. Simply plug the IO connector into the header on the back of the dash(under the access panel), route supplied extension harness to the fuel tank, and terminate the wires to the fuel level sending unit. Dash Configuration can be found here: https://documents.holley.com/199r11021.pdf
This kit includes:
1x Pre-terminated I/O connector for the back of the dash, mated with an external female quick-connect for easy dash removal and install
1x Extension harness with male quick-connect and 10ft wire leads
All warranty questions, claims or otherwise should be directed toward the manufacturer, Holley.