Tick Performance proudly offers our Elite Series of Camshafts designed specifically for LS1 & LS6 Engines! Using the latest and greatest technology available, we've put together a complete line of Camshafts that are designed to meet every goal, from mild to wild. Our Elite Series of Camshafts are all manufactured by Cam Motion and are updated with a new version every time an advancement in valvetrain technology becomes available, so they're ALWAYS cutting-edge! Although we suggest measuring for piston-to-valve clearance during ANY camshaft install, every Elite Series Camshaft is designed to fit in a stock engine & stock heads with adequate clearance unless otherwise noted. These cams are designed to maximize power, reliability and valvetrain longevity.
Designed for: LS1, LS6, LQ4 and LQ9 Engines (325-364ci) with Cathedral Port Heads (as they're equipped with stock) Basic Operating RPM Range: 2000-6600 Expected Horsepower Gains: 45-55RWHP over the stock camshaft in a well-optimized setup (the higher the boost, the higher the gains!) Stall Converter Required: Yes, 3600RPM+ Rear Gear Upgrade Required: No, unless your car has an automatic transmission with a 2.73 gear (we suggest 3.23+ for automatics) Works Well with Nitrous: No, designed for turbocharged applications Will Pass Most Smog Emissions: No
Our Tick Performance Turbo Stage 2 V2 Camshaft is intended for 4.8, 5.3L, 5.7L, or 6.0L single turbocharged motors utilizing a turbo with up to a 87mm turbine wheel. Whether it’s a stock cubic inch build, forged bottom end build, or a junkyard motor that you just want to slap a turbo camshaft in and run fast on the street (and at the track) with - this cam is for you. This camshaft will have a slightly more noticeable idle than our Turbo Stage 1 camshaft, but still nothing radical. We strongly suggest the use of our Tick/PAC Dual Valvesprings and hardened pushrods with this camshaft (sold separately.) Hundreds of hours were spent developing this camshaft to perform precisely the way we advertise, so as a result, changes to the LSA or any other specification of this camshaft are not available.