EWP®150 Kit Remote Electric Water Pump (24V) (PART #8061)
The EWP®150 Alloy 24V is available for purchase in the following options:
- Pump Only (Part #8161)
- Kit (Part #8061)
- Combo with Controller (Part #8971)
Muscle up your engine cooling system with the Davies Craig EWP®150 alloy Electric Water Pump. Like all EWPs, this advanced unit is designed for remote mounting in the engine bay to satisfy those higher horsepower, turbocharged, supercharged, and worked engines which develop excessive heat.
The compact EWP®150 alloy unit is manufactured with -AN16 ORB internal inlet and outlet fitting for neat, tight screw-in fitting applications.
This rugged alloy hi-flow electric water pump is designed to complement or replace the engines existing mechanical water pump. This essential performance accessory increases power to your vehicles drive wheels and improves coolant temperature control.
KIT CONTENTS
| Description | Quantity |
|---|---|
| EWP®150 Pump 24V | 1 |
| Hardware Bag | 1 |
| Hose Clamp | 2 |
| EWP Basic Pump Loom | 1 |
| EWP Universal Instructions | 1 |
Technical Specifications
| Voltage | 24 Volt Pump |
|---|---|
| Operating voltage | 20V DC to 24V DC |
| Maximum current | 5.5A @ 24V |
| Flow rate (max) | 162L/min (42.8 US gal/min) @ 24V DC |
| Operating temp. | -40° to 120°C (-40° to 248°F) |
| Pump design | Clockwise centrifugal with volute chamber |
| Pump weight | 1,170 grams (2.6 lb) |
| Pump material | Aluminium (Powder Coated) |
| Burst pressure | 500 kPa (72.5 psi) |
| Seal | Ceramic face seal |
| Self Priming | No, none of our pumps are self-priming |
| Fits hose sizes | 35mm to 51mm (1? to 2) |
| Inlet & Outlet Fitting | -16AN ORB |
| Push-On fitting Size | EWP Inlet & Outlet 38mm with 3mm Sleeve (#8510) 44mm with 6mm Sleeve (#8511) 51mm |
